[loploklok]

Hi u4jef, welcome to the forum..
I don’t know which broadband modem you have but I have use two external modems a toshiba and a huawei. The first have in my case some reception problems and the second have a strong signal.
I have a N130 too and I have solder a second pcie connector but it doesn’t work. If you open your model, please take photos of the motherboard. It will be very useful for me and other members.
Thank you.

[loploklok]

I think I’ve to study hard those threads.

[loploklok]

Could someone help me to find what can I do?
I have read something about this is a connector that works like an usb port.
I take this from wikipedia:
PCI Express Mini Card edge connector provide multiple connections and buses:

* PCIe ×1
* USB 2.0
* SMBus
* Wires to diagnostics LEDs for wireless network (i.e., WiFi) status on computer’s chassis
* SIM card for GSM and WCDMA applications
* Future extension for another PCIe lane
* 1.5 and 3.3 volt power

[loploklok]

This motherboard isn’t the same like the NC10, If I need to solder some capacitors, I don’t know where to solder them and where to put the bridges. I’m so confused.
Please, I need some help.
http://yfrog.com/1gp3200253j
http://yfrog.com/1gp3200254j
http://yfrog.com/b9p3200257j
http://yfrog.com/j9p3200258y
http://yfrog.com/jxp3200259j
http://yfrog.com/9gp3200260j
http://yfrog.com/9gp3200261j
http://yfrog.com/78p3200262j
[img]http://yfrog.com/78p3200263j[/img]
[img]http://yfrog.com/78p3200264j[/img]
[img]http://yfrog.com/9gp3200265j[/img]

[loploklok]

.

[loploklok]

I’m going to see on the backside of the motherboard and take some photos. I don’t know if I have those capacitors soldered.

[loploklok]

Sorry for my delay. I have no pics of the connector mounted but I have some within it.

[Mod Edit] Images re-sized and click through added

[loploklok]

Hello, I’ve fitted a second mini pci-e connector on a N130 but I don’t know why it doesn’t work. My broadcom Crystal works fine in the wifi port but it is half size. I have test the wifi card and the Broadcom Crystal on the new port with any issue.
I don’t know if it needs some resistor or bridge.
Has someone any idea?
Sorry for my bad english.

[Author]

Posts