- This topic has 3 replies, 2 voices, and was last updated 15 years, 6 months ago by
.
-
Posts
-
I have a NC10 3 months old
Last night I was using it on battery only – battery ran out so I attached it to the powerlead and tried to restart it – nothing Then I noticed the orange charging light was not showing at the front
A couple of days ago I seem to recall that flickering slightly when the power lead was plugged in
Do u think…
1.battery problem
2.Mains Charger AC Power Supply not working
3.DC input connector inside the computer faulty ( I have had a brief look inside and it doesnt appear loose)Unfortunately I dont know anyone with a nc10 to check the battery and power supply
thanks
kulevet – Welcome to the forum
It could be either 1 or 2 above.
Have you tried removing the battery and running the NC10 from the mains only? It could be a faulty battery that is not accepting a charge. Try another battery – your local shop may be able to help with that.Hope this helps
Tried plugging in without battery – no joy will try going to a shop tomorrow and trying a different ac lead
- You must be logged in to reply to this topic.