Torx size for NC10 memory upgrade?

[bhayss]

I got to the hardware store and couldn’t quite discern the correct size. T-8?
What is the correct size, please.

Thanks –

[morg]

A standard phillips screwdriver was fine for the memory cover on mine, altho I have read the post on the other forum: http://www.sammymobile.com/plugins/forum/forum_viewtopic.php?14359

[bhayss]

Does one need Pozidrive or Torx, or are they the same.
Regardless, what size, please.

[Parody]

Torx is a six-pointed star shape. Pozidriv is a plus shape like Phillips, but with extra grooves cut into the corners. People here have said a #0 or #1 Pozidriv is correct; I used a small Phillips driver to open the memory compartment and had no problems.

[bhayss]

Thanks. I got impatient and went ahead with a small Phillips. Worked swell.
But now with the ram upgrade my wireless connection seems somewhat dysfunctional.
Is it conceivable that the upgrade somehow impacted the wireless capability?
My reception distance from the router seems to be half what it was before the upgrade.
Could it be that shutting off the computer (to do the upgrade) caused a reset of some parameters?

[TCMuffin]

[quote1239950155=bhayss]
Could it be that shutting off the computer (to do the upgrade) caused a reset of some parameters?
[/quote1239950155]
No.

Try cold booting your NC10 by pressing and holding the ‘On/Off’ button until the computer shuts down and reboot your router by removing and replacing the power cable.

[Author]

Posts