- This topic has 2 replies, 3 voices, and was last updated 15 years, 10 months ago by
.
-
Posts
-
Hello to all!
i am looking for a software which is able to administer 2 UMTS-SIM-Cards: The one in the NC10 and one in an USB-UMTS-Stick.
Thanks to all tips.
FunThomas – Welcome to the forum
When you say administer do you mean the control of the 2 sims network access or something else?
Presumably at the momemt you are using Samsung CM and some other network manager for your usb stick.Perhaps you could provide some more information
Fun Thomas,
First off, welcome to the site. Using my scientific method of puzzle solving (as per jeepers01 post requesting more information). I am assuming that you have a 3G-capable NC10 that has a SIM card port and that SIM card is for one carrier and that you also have a USB stick with a SIM card that accesses another carrier. Am I on the right track? If so, you may have to download software from the USB-SIM card stick and once it’s downloaded you should be able to “enable” or “disable” either that one (the USB-SIM card stick) or the other one (the integrated SIM card port on the NC10). Chances are that you can’t have both attached at the same time, even if one of them is disabled. That I can’t state with certainty. If my answer is completely off base, oh well, I tried to help. Good luck.
dockehr
- You must be logged in to reply to this topic.