- This topic has 2 replies, 2 voices, and was last updated 16 years ago by
.
-
Posts
-
can anyone please help me to overcome a slight obstacle. i have in car tv that only has a single yellow composite video rca phono plug input and red n white rca phonos for audio. i have sound via the nc10 headphone socket through a 3.5mm jack to twin phono cable n its crystal clear. but when i plug the vga to rca adapter into the side of the nc10 there is no picture. i tried to change the Easy Display Manager by holding Fn and F4 and it only offered me the 1 option the inbuilt LCD screen. i tried my desktop pc monitor and all 4 options appeared LCD,CRT,LCD + CRT clone and LCD+CRT Dual view.
IF i leave the wire in the nc10 but disconnect it at the desktop monitor end, the 3 other than LCD options disappear again. so This tells me that my nc10 cant find the car tv. there must be some way that i can bypass this so that i can send a video signal to my nc10 vga output socket. i had a look round the display settings and options but not sure where to sart making changes if any to resolve it. so can anyone please help?I don’t think you can go from VGA to composite video, at-least not using the graphics chipset in the NC10. As the two use a different colour space and the NC10 doesn’t by default output 480i.
To make the conversion I think you would need to buy a transcoder box.
EDIT: Something like this.
thanks for your reply. you are most certainly right i need a box of electronics to take care of this challenge. a friend on facebook sent me a link to a product on ebay that is what he bought when he tried to connect vga powered goggles for his laptop. So if anyone out there is trying to solve the same issue i recommend you have a look at this product.
[MOD EDIT] Long link fixed ~TCMuffin
- You must be logged in to reply to this topic.