[N120] Ubuntu Netbook Remix install, usb automount doesn't work. Wifi key no go as well.

[ipwnponies]

I installed UNR on my n120 via usb (syslinux and copy livecd contents over) and now my usb keys don’t automount. It seems from the dmesg that usb key is being recognized as a cdrom. I would like the default behaviour of hal(?) automounting the usb.

Quote:

[ 6691.488144] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 6691.622084] usb 1-6: configuration #1 chosen from 1 choice
[ 6693.237626] Initializing USB Mass Storage driver…
[ 6693.240586] scsi2 : SCSI emulation for USB Mass Storage devices
[ 6693.242128] usb-storage: device found at 4
[ 6693.242140] usb-storage: waiting for device to settle before scanning
[ 6693.242200] usbcore: registered new interface driver usb-storage
[ 6693.242216] USB Mass Storage support registered.
[ 6698.240752] usb-storage: device scan complete
[ 6698.241500] scsi 2:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 2.18 PQ: 0 ANSI: 2
[ 6698.242110] scsi 2:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 2.18 PQ: 0 ANSI: 2
[ 6698.247259] sd 2:0:0:0: [sdb] 1994385 512-byte hardware sectors: (1.02 GB/973 MiB)
[ 6698.247961] sd 2:0:0:0: [sdb] Write Protect is off
[ 6698.247980] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6698.247994] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6698.255842] sd 2:0:0:0: [sdb] 1994385 512-byte hardware sectors: (1.02 GB/973 MiB)
[ 6698.256458] sd 2:0:0:0: [sdb] Write Protect is off
[ 6698.256476] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6698.256490] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 6698.256513] sdb: sdb1
[ 6698.288831] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 6698.289177] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 6698.297731] sr0: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 6698.297751] Uniform CD-ROM driver Revision: 3.20
[ 6698.298199] sr 2:0:0:1: Attached scsi CD-ROM sr0
[ 6698.298504] sr 2:0:0:1: Attached scsi generic sg2 type 5

[srvsn]

This is beyond me but I have UNR 9.04 on my N120 and things seem to work *I did change the wireless to an Airport Extreme card with a Broadcom chipset. Is there something I can do on mine to help with your problem?

[ipwnponies]

I added an entry to my 30-keymap-misc.fdi for my n120 kept the settings the same as the nc10. The key seems to be mapped but it doesn’t do anything to NetworkManager. How did you set yours up?

[Author]

Posts