- This topic has 5 replies, 4 voices, and was last updated 15 years, 8 months ago by
.
-
Posts
-
Welcome to the forum, pheetus 🙂
Have you tried removing the battery for a few minutes and then trying to turn on your N220 😕
Just in case anyone thinks I’m losing the plot…..for some reason, pheetus has removed the thread to which I respnoded. If anyone’s holding their breath wondering what my random answer means…..the original question was:
“‘Hi,
[this isn’t a complaint about battery life]So i received my N220 this afternoon, and set about removing the software I did not want (only the samsung recovery software and the HyperSpace software remain from what was originally installed). I also did some other config and UI changes, as is normal. machine was operating/booting normally
I wanted to see what the HyperSpace software did out of curiosity so booted into that.
After having a little look (not really much to look at) i powered the machine down.Now there is no reaction from the power switch – absolutley nothing.
battery was at 50% charge.
If i plug in the power, the charge light comes on. but nothing happens at all when i try and turn the thing on now.Any ideas, or is this going to be a Return To Base on Monday morning?
:p”
pheetus – Welcome to the forum
Very strange that your OP has disappeared and this has resulted in Jayne thinking she might be loosing the plot by responding to phantom posts.
[quote1265541525=TCMuffin]
respnoded
[/quote1265541525]
…..and now I can’t spell repsonded…..responedd….rseponded….responded
- You must be logged in to reply to this topic.