RAM Upgrade?

[animestuff1]

Hey

I got my NC10 a week ago and I am trying to upgrade the ram. I have an small philips screwdriver but the screw will not come out. I have tried it so hard that the nail head is starting to deteriorate. Am I doing something wrong???

Thanks

[soutthpaw]

Lefty losey, righty tighty????

[MattJessop]

Unless you are in Australia…. ;o)

[Alfihar]

No the screw heads are easy to damage, just make sure you have the right sized screwdriver.

One of the screws in mine was so tight that I stripped the head and had to use a drill on it.

[animestuff1]

Counterclockwise to remove, yup thats what I’ve been doing.

I think my screw is just really tight like Alfihar said so i’ll try to get a powerdrill

Thanks for the help

[jez]

Unfortunately it seems that the screws aren’t very tough. You aren’t the first to have reported a similar problem although I’ve not yet heard of anyone who didn’t manage to get in eventually.

[Alfihar]

Careful with the drill though, before drilling I’d try and just remove the whole back instead, with the hope that all the other screws come out ok.

[Author]

Posts