- This topic has 9 replies, 5 voices, and was last updated 13 years, 3 months ago by
.
-
Posts
-
hi
does anyone know how to change startup screen ?
Now, when I boot up there is ugly dealer logo (IPLUS) and info F2 for bios, F4 for recovery.I would like to have either no image or something else.
thnx in advance
Hi, sounds like your dealer has changed the bios!? Try using the Samsung Update Manager to update the bios, current version is System BIOS/MICOM (ver.04CA). You can also download the latest bios by visiting the support area of Samsung’s Web site. This should change the startup logo to the default Samsung one.
Try here it can be done on any PC.
The image the BIOS bot screen uses cannot be changed easily, this is what appears before the windows logo (assuming you are using Windows).
However you can change the screen to show diagnostic information instead, by going into the BIOS (F2) then on the Boot tab set the “Boot-time Diagnostic Screen” to Enabled.
[quote1235910137=FunGous]
yes, diag screen works well but it increasing booting time….
[/quote1235910137]
Did you try it?
I see no difference in boot time between having the diagnostic screen hidden or visable.yea you are right, there is no additional delay with diag screen.
I got other problem, after downloading bios udpate from samsung site I got a message:
Current Model: NC10(A03)
New Model: NC10(A00)
and can not contiunue with bios update. what is wrong ?Your Iplus version i assume is the 3g enabled polish version
which you can get free with an iplus mobile broadband contract in poland.That may be why you cannot upgrade to samsung standard nc10 bios.
- You must be logged in to reply to this topic.