NC-10 w/Kensington Flat Adapter

[dxace1]

I would like to use my NC-10 with
Kensington’s flat travel adapter,
which cuts down significantly on
space.

But there does not apepar to be
a pin available from Kensington
that will fit the NC-10 power jack.

I wonder if there is a way to find
out from Samsung whether there
is any alternative to powering the
NC-10 with their adapter?

[california_jeff]

you could certainly cut and solder the old connector onto the new power supply.

[Jonny Blond]

I wouldn’t cut the sealed plug off. the reason there all sealed type plugs theses days is to conform to British safety standards.

its a usb charger. it charges through the usb port. Not the power socket. There has been some discussion on usb charging of the sammy but im not sure it can be done. try searching for it.

[Author]

Posts