- This topic has 6 replies, 3 voices, and was last updated 13 years, 5 months ago by
.
-
Posts
-
in my zeal to optimize my sammy, i’ve turned off the bluetooth, but can’t seem to find it again to test it. help!
many thanks,
mTry Control Panel, there should be a Bluetooth Icon somewhere in there… If not, go to device manager and reenable the Bluetooth from there.
thanks tried both. bluetooth manager says the device is working but stopped. same in device manager.
how do i do that?
i went into bluetooth configuration in the control panel and at the Diagnostic tab, the device, Broadcom 2045, is shown as Active and Preferred. Down below, the device status shows as “The selected device is stopped. To start the device, in the Windows system tray, right-click the Bluetooth icon … “
Well, I don’t have a bluetooth icon in my tray.Go through the Samsung Software Media CD that comes with the machine. In folder BASW-01178A is a file SWDesc.txt which reports that the folder contains the bluetooth drivers.
Copy the folder to your NC10 and then open it. Click on setup.exe. It will uninstall the BT drivers etc and then re-install to bring the machine back to normal.
- You must be logged in to reply to this topic.